CZ-70 (CZ-50) pistolet expliqué
Field dismounting of the CZ-70 pistol
- Removal of the magazine
- Detachment of the slide
- Inspection of the abutment extension of the slide
- Dismounting latch explained
Advanced dismounting of the slide
- Dismounting of the firing pin
- Dismounting of the extractor
- Dismounting of the "cartridge loaded" indicator
Advanced dismounting of the frame (1)
- Dismounting of the grip plates
- Dismounting of the main spring
- Reason of an exceedingly high weight of the trigger pull
- Extraction of the friction spring
Advanced dismounting of the frame (2)
- Dismounting of the side cover plate
- The best method of dismounting the cover plate
- Dismounting of the trigger assembly
- Dismounting of the sear
- Reinstallation of the sear
Advanced dismounting of the frame (3)
- Dismounting of the magazine catch
- Dismounting of the hammer
- Dismounting of the safety
- Dismounting of the takedown latch
- Dismounting of the hold-open latch
- Dismounting of the barrel
Functioning of the CZ-70 pistol (1)
- Installation of the magazine in the grip
- Friction spring explained
- Manual cycling of the slide and chambering
- The "cartridge loaded" indicator
Functioning of the CZ-70 pistol (2)
- Hammer cocked by the slide recoil
- Firing in single action mode
- Recoil of the slide and disconnection
- Early stage of the slide recoil
- Modified firing pin by Harrington Products
Functioning of the CZ-70 pistol (3)
- Extraction and ejection of the cartridge shell
- Trigger released for reconnection
- Shooting in double action mode
Functioning of the CZ-70 pistol (4)
- Improvement of the trigger weight
- The hammer rebound in question
Functioning of the CZ-70 pistol (5)
- Hold-open latch functioning explained
- Perfect alignment of the hold-open latch
Functioning of the CZ-70 pistol (6)
- Lowering of the hammer at rest by using the trigger
- Hammer retained by the thumb and trigger released
- Lowering of the hammer at rest using the safety lever
The manual safety of the CZ-70 pistol
- Structure of the safety body
- Functioning of the safety when hammer is at rest
- Functioning of the safety when hammer is cocked
- Action of the safety locking stud on the trigger bar
From the CZ-50 to the CZ-70
- Early CZ-50 pistol
- Strakonice factory production (1950 - 1952)
- Uherský Brod production (1957 - 1970)
- Diagram of the early CZ-50 pistol
- CZ-50 and CZ-70 pistols compared
- CZ-70 annual production
- Czech commercial proof